Uwatec Chromis Technical Information download pdf (Page 53)

5. Meridian PC interface

53

English

SCUBAPRO MERIDIAN

6. Taking care of Meridian

6. TAKING CARE OF MERIDIAN

6.1 Technical information

Operating altitude:

with decompression – sea level to approximately 4000m/13300ft

without decompression (GAUGE mode) – at any altitude

Max operating depth:

120m/394ft; resolution is 0.1m until 99.9m and 1m at depth deeper than 100m. Resolution

in ft is always 1ft. Accuracy is within 2% ±0.2m/1ft.

Decompression calculation range:

0.8m to 120m / 3ft to 394ft

Clock:

quartz clock, time, date, dive time display up to 999 minutes

Oxygen concentration:

adjustable between 21% and 100%

Operating temperature:

-10 ºC to +50 ºC / 14F to 122F

Power supply:

CR2032 litium battery

Life of the battery:

2 years or 300 dives, which ever comes ﬁrst. Actual battery life depends on the number of

dives per year, the length of each dive, the water temperature and the usage of backlight.

6.2 Maintenance

The depth accuracy should be veriﬁed every two years, by an authorized SCUBAPRO

dealer. Aside from that, Meridian is virtually maintenance free. Meridian is manufactured

from highest grades of stainless steel. Salt water and substances dissolved in it may

cause corrosion, surface rust or build an organic ﬁlm which may disturb the functions of

the Meridian. Therefore, it is necessary to rinse it carefully with fresh water after each dive

and change the battery when needed. To avoid possible problems with your Meridian, the

following recommendations will help assure years of trouble free service:

• avoid dropping or jarring your Meridian

• do not expose Meridian to intense, direct sunlight

• do not store Meridian in a sealed container, always ensure free ventilation

• If there are problems with the water contact, use soapy water to clean Meridian and dry

it thoroughly. Do not use silicone grease on the water contacts!

• Do not clean Meridian with liquids containing solvents.

• Check the battery capacity before each dive.

• If the battery warning appears, replace the battery.

• If any error message appears on the display, take Meridian back to an authorized

SCUBAPRO dealer.

Uwatec Chromis Technical Information Page 53

Comments to this Manuals

Uwatec Chromis Technical Information Page 53

Comments to this Manuals

Related products and manuals for Scuba diving fins Uwatec Chromis