Uwatec Chromis Technical Information download pdf (Page 50)

50

4. Meridian accessories

SCUBAPRO MERIDIAN

5. Meridian PC interface

4. MERIDIAN

ACCESSORIES

4.1 HR belt

Meridian receives fthe signal of the

SCUBAPRO heart rate belt. The position to

wear a HR belt is shown below.

Adjust the strap so that it is comfortable to

wear but so that it holds on the place.

When using a diving suit the HR belt must

be directly against the skin.

Moisten the electrode areas if your skin is

dry or when using a dry suit.

You must enable the heart rate setting

at your Meridian, refer to chapter 3.2.4

Workload settings (pulse limits) of how

to do this.

After a dive rinse the heart rate belt in fresh

water, dry it and store on a dry place.

With completely sealed HR belts the battery

cannot be changed.

We recommend having the battery change

by authorized SCUBAPRO dealer for the

HR belts with a battery cap.

Check the operation conditions and depth

rating of the HR belt from the unit or its

package.

4.2 Nylon arm strap

Divers using thick neoprene wetsuit or

drysuit may prefer longer arm strap.

Meridian can be equipped with one piece

31cm/12inch Scubapro nylon arm strap.

F

NOTE: The Meridian arm strap is

attached with Solid Stainless Steel pins

that are splintered on one end. Always

push the pins out with the splintered

end ﬁrst. In the housing the splintered

side can be recognized from slightly

larger diameter guiding at the hole.

The disassembly and assembly of the

arm strap requires a special tool. We

recommended the arm strap change

to be done by authorized SCUBAPRO

dealer.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 56 57 58

Comments to this Manuals

No comments