Uwatec Chromis Technical Information Page 32

  • Download
  • Add to my manuals
  • Print
  • Page
    / 58
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 31
32
3. Meridian as a dive computer
SCUBAPRO MERIDIAN
3. Meridian as a dive computer
3.6 Diving with Meridian
The functions of the buttons during diving 
are summarized in the table below.
Note that Meridian can be set to three dive 
modes: SCUBA, APNEA and GAUGE. Due 
to  the  operation  differences  also  buttons 
have different functions in each mode. 
LIGHT
(Left upper
button)
Short press = backlight,
Long press = bookmark
+/UP
(Right upper
button)
Short press = alternative display data
Short press in APNEA mode = switch between HR and ASC speed
on display
Short press in GAUGE mode = alternative display data
Long press in GAUGE mode = reset average depth counter
-/DOWN
(Right lower
button)
Short press = reset safety stop timer
Long press in APNEA mode = manual start and end the dive
Short press in GAUGE mode = start/stop timer
SEL/ESC
(Left lower
button)
Long press = select manual gas switch
Short press (after long) = enter manual gas switch
3.6.1 Display information
Upon immersion, Meridian will automatically 
start to monitor the dive regardless of what 
state  it  was  in  prior  to  the  immersion. 
Details on the information displayed can be 
found in the next sections.
The dive time is displayed in minutes. If during 
the dive you ascend to the surface, the time 
spent on the surface will only be counted if 
you  descend  again  below  0.8m/3ft  within 
5  minutes.  This  allows  for  brief  periods 
of  orientation.  While  on  the  surface,  the 
time  will  not  show  as  progressing  but  it 
is  running  in  the  background.  As  soon 
as  you  submerge,  the  time  will  resume, 
including the  time  spent on the surface. If 
you  spend  more than  5  minutes  at  depth 
shallower  than  0.8m/3ft,  the  dive  will  be 
considered ended, the logbook closed and 
a subsequent immersion would cause  the 
dive time to start again from zero.
Maximum  displayed  time  is  999  minutes. 
For  dives  longer  than  that,  the  dive  time 
starts again from 0 minutes.
Current depth Dive time
Max depth No-stop time
Dive display limits (mertic)
Page view 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 57 58

Comments to this Manuals

No comments