Uwatec Aladin PRIME Technical Information download pdf (Page 20)

4 Functions during the dive

III UWATEC

Aladin

dive computers

4.1 Immersion

If the water contacts are deactivated (->41): Switch on Aladin

before immersion.

If you have chosen the option "Water contacts off" ("set 1" or SmartTRAK),

Aladin

will turn on with a delay of up to 1 minute into the dive. This will

affect functioning of the computer. Make sure that the computer is on befo-

re starting the dive.

After immersion, starting at a depth of about 0.8 m (3 ft), all diving functions are monitored, i.e. depth

and dive time displayed, maximum depth stored, saturation of tissues calculated, no-stop time or decom-

pression prognosis determined, ascent rate controlled and displayed and the correctness of the decom-

pression procedure supervised.

4.2 TEC Setting bookmarks

During the dive you can create bookmarks in your dive profile by pressing . The logbook icon

appears for 4 seconds and an audible signal confirms the creation of the bookmark. These bookmarks will

be graphically displayed in the dive profile of SmartTRAK.

To visualize the bookmarks on the dive profile, the box "Generate bookmarks"

under "Program options" in SmartTRAK must be selected.

4.3 Dive time

The whole time spent below a depth of 0.8m (3 feet) is displayed as dive time

in minutes. The time above 0.8m (3 feet) is counted as dive time only if the

diver descends again below 0.8m (3 feet) within 5 minutes.

While the dive time is running, the colons on the right of the figures are flas-

hing in one second intervals. Maximum dive time displayed is 199 minutes.

If a dive lasts longer than 199 minutes the dive time display starts

again at 0 minutes.

4.4 Current depth / O

% mix

Current depth is given in 10 cm increments (1 foot).

At a diving depth of less than 0.8 m (3 ft) the display shows

<– – –>.

The O

% mix is diplayed as long as CNS O

% = 0 and no ascent speed is

indicated.

DEPTHDEPTH

NO STNO STOPOP

DIVE DIVE TIMETIME

DEPTHDEPTH

NO STNO STOPOP

DIVE DIVE TIMETIME

DEPTHDEPTH

DIVE DIVE TIMETIME

Current depth

> Time

Dive time

% mix

WARNING

Nitrogen loading bar

TEC Half time alarm (turn around alarm)

If half of the set maximum dive time (->39) has elapsed, an audible signal

goes off and flashes for 1 minute.

TEC Set dive time has elapsed

An audible signal goes off and the dive time starts flashing.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

Comments to this Manuals

No comments

Uwatec Aladin PRIME Technical Information Page 20

Comments to this Manuals

Related products and manuals for PC/workstation barebones Uwatec Aladin PRIME