Uwatec Aladin 2G User Manual download pdf (Page 15)

English

II UWATEC Aladin TEC 2G

2 Operation

2.10 Active backlight

The display of Aladin can be illuminated both on the surface and underwater.

The backlight can be activated by pushing . The light will turn off auto-

matically. The default duration is 6 seconds. The duration can be changed in

set 1

(->47) or with SmartTRAK between 2 and 12 seconds. It can also be

set to "push on / push off", in which case the light stays on until you turn it off

by pressing again.

The backlight can only be activated if the computer display is on.

Repeated activation of the backlight will reduce battery life.

Battery warning appears. Backlight deactivated. Replace the battery! ->51

Battery performance high enough for diving.

Diving not possible, dive planner and settings are disabled

Flashing battery warning. Audible alarms

and attention messages disabled! Backlight

deactivated! Risk of computer malfunction.

Do not let the battery reach this condition!

WARNING

Bar graph

interpretation

2.9 Checking the battery condition

From the

time of day display you can check the battery condition by pushing

2x or 3 x (depending on whether there is desaturation time left).

Aladin displays the estimated remaining battery performance for 5 seconds as

a bar graph. If the bar graph shows 3 segments the battery warning appears

->19 and the battery has to be replaced ->51.

• If the bar graph shows 2 segments, the battery

symbol will blink, on the surface and in dive

mode, to alert the diver of a dangerous situation:

the battery may not have enough energy to finish

a dive.

• Replace the battery when the steady battery

symbol appears (3 segments)!

The temperature influences the battery performance. In cold water it is lower than

in warm water. If the battery shows 4 segments on the surface, it is possible for it to

drop to 3 segments during the dive. If this is the case, the backlight will be tempo-

rarily disabled. See below.

Aladin

marks dives started with 3 or less segments in the logbook with the

battery symbol.

Logbook information is not lost even when the battery is removed for a long

time.

Battery condition /

performance

WARNING

2.8 Displaying the date

From the

time of day display you can display the date by pushing 1x or 2x

(depending on whether there is desaturation time left).

The display switches back to the time of day display after 5 seconds without

operation.

Date

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 53 54

Comments to this Manuals

No comments

Uwatec Aladin 2G User Manual Page 15

Comments to this Manuals

Related products and manuals for PC/workstation barebones Uwatec Aladin 2G