Uwatec Chromis User Manual download pdf (Page 26)

26

CHROMIS USER MANUAL

4.4.4 Setting the surface interval

alarm

By pressing SEL button at this menu the

function starts blinking and you may enable

or disable the alarm by selecting on/off

with the + or - buttons. After conﬁ rming by

pressing SEL button the surface interval

time starts blinking. By pressing + or - you

can select the interval from 15 seconds up

to 10 minutes. By pressing SEL again the

selection will be conﬁ rmed.

4.4.5 Setting the ascent speed alarm

By pressing SEL at this menu the function

starts blinking and by pressing +/- you may

select between enabling or disabling the

alarm with on/off setting. After conﬁ rming

by pressing the SEL button the ascend

speed starts blinking. By pressing + or -

buttons you may select the value from 0.1

to 5.0 meters/second (1..15 feet/second).

By pressing SEL the value will be conﬁ rmed

and the function starts blinking. By pressing

SEL the selection will be conﬁ rmed.

4.5 SWIM mode

If your Chromis has the swim mode enabled

the following menu will be shown.

For the Surface Exercise you must set the

kick cycle threshold and the distance per

kick for proper result.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 46 47

Comments to this Manuals

No comments