Uwatec Chromis User Manual download pdf (Page 10)

10

CHROMIS USER MANUAL

3.1.1 Setting the alarm clock

By pressing the SEL button the alarm status

will start blinking and can be selected to

either on or off by pressing + or - buttons.

By pressing the SEL button the hours of the

alarm will start blinking.

You can scroll the hours setting by pressing

+ or – buttons.

By pressing the SEL button the minutes

will start blinking and by pressing + or –

buttons you can scroll them.

Pressing the SEL button will conﬁ rm the

settings.



NOTE: The sound off setting does not

affect the alarm clock. However, the

intelligent battery stretching algorithm

disables all warning tones when there

are less than 2 dots left in the battery

status display or when the battery

symbol is blinking in other displays.

3.1.2 Setting the UTC

The UTC setting will change the shown

time compared to Greenwich 0-Meridian.

This feature is practical when travelling

through different time zones.

By pressing SEL the hours will start blinking.

You may edit them with + or – buttons in

a range of +14h..-13h. By pressing SEL

the minutes will start blinking and you may

edit them with + or – buttons in 15 minute

steps. The UTC setting will be conﬁ rmed by

pressing the SEL button.

3.1.3 Setting the time and 24h or

AM/PM mode

In the display above the current time is

shown on the display.

By pressing the SEL button the 24h or 12h

setting on the top row starts blinking. You may

change the setting by pressing + or – buttons.

By pressing the SEL button the time setting

will be activated: hours start blinking and

seconds will turn to 00. You may change

the hours with + or – buttons. By pressing

the SEL button the selection will change to

minutes and can be edited the new time

setting will be conﬁ rmed by pressing the

SEL button.



NOTE: seconds cannot be edited;

they always start counting from 0.

3.1.4 Set dual time mode

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 46 47

Comments to this Manuals

No comments