Uwatec Aladin Pro Nitrox Technical Information download pdf (Page 35)

4. Gauge mode

33

English

SCUBAPRO ALADIN 2G

4. GAUGE MODE

WARNING

In gauge mode ALL audible and visual alarms

and attention messages are turned off.

In gauge mode Aladin 2G will display depth,

dive time and max depth. By pressing

you can scroll from the max depth to

the temperature, to the average depth,

to the time of day and back to the

max depth. By pressing

you can

restart the stopwatch. This generates

a bookmark. Gauge mode does not

support the calculation of no-stop time

or the supervision of decompression.

Supervision of ppO

2

max and CNS O

2

%

will also be switched off. Aladin 2G will

display no information about microbubble

development. The settings for the gas

mixture, MOD and microbubble level

cannot be set and the dive planner cannot

be selected.

Switching the gauge mode on and off

Gauge mode can be switched on and off at

the surface, when there is no desaturation

and no-dive in gauge mode has been made

in the last 48 hours.

WARNING

• Dives in gauge mode are performed at your

own risk!

• After diving in gauge mode you must

wait for at least 48 hours before using a

decompression computer.

After diving in gauge mode, Aladin 2G can

not be used as dive computer for 48 hours.

Procedure:

1. From the time of day display push

or

until the “ALGO” is displayed.

(If Aladin 2G shows “ – – – ” the gauge

mode cannot be switched “on” or “off”.

Aladin 2G shows “ – – – ” for 48 hours

after a dive in gauge mode and as long

as there is remaining desaturation after

a dive in computer mode.)

2. Conﬁrm with

that you wish to

activate or deactivate the gauge mode.

“deco”, “gauge” or “apnea” starts

ﬂashing.

3. By pushing

or the mode will

scroll between: Gauge, Deco (SCUBA

diving) or Apnea. Select: “Gauge”.

4. Conﬁrm your settings with

.

Without conﬁrmation the display will

disappear after 3 minutes and your entries

will not be accepted.

Diving in gauge mode

The following information is displayed in

gauge mode:

DEPTH

DIVE TIME

Current

depth

Stopwatch

Gauge icon

Dive

time

Max depth /

Temperature /

Average depth (AVG)

>Temperature

>Average depth (AVG)

>Temperature , Time

>Max depth

The average depth is continuously

updated and represents the time averaged

depth since the beginning of the dive.

You can reset the average depth at any

time by pushing

. This generates also

a bookmark.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 72 73

Comments to this Manuals

No comments